Expansion Modules - Tpa Spa

Go to content

Main menu:

products

TRS-IO-E

TRS-IO-E interfaces to the coupler by the TRS bus; for its operation it is necessary that the module is connected, via this bus, to a coupler of the series TRS. Each module is equipped with 16 bi-directional lines of digital I/Os. Each line is configurable as input or output. TRS-IO-E complies with the directive EMC 2004/108/EC.

TRS-AN-E

TRS-AN-E interfaces to the coupler by the TRS bus. TRS-AN-E manages 1 analog input (16 bit), 1 analog output (16 bit) and communicates with a coupler and with other expansion units connected to the same TRS bus. TRS-AN-E integrates a precision amplifier with programmable gain, useful to implement different types of measuring instruments. TRS-AN-E integrates an accurate reference voltage generator, it complies with the directive EMC 2004/108/EC.

TRS-24-E

TRS-24-E interfaces to the coupler by the TRS bus; for its use it is necessary that the module is connected, via this bus, to a coupler of the series TRS. Each module is able to connect 8 power points from the field (+24V) and 8 points of the corresponding grounds, making easy the wiring of the I/O signals of the adjacent TRS I/O expansion.

PRODUCT DATASHEET PDF

  

IP67 Terminal Block
The new terminal block, equipped with eight 3 poles-M8 connectors with signal led, becomes part of the Tpa products in order to ensure good flexibility of use and high standards of protection against water and dust.
It acts as an extension of the TRS terminal blocks, allowing wiring on the machine with IP67 protection level. The 3 poles - M8 connectors allow either the connection of sensors and actuators.
IP67 protection is guaranteed both on the device, that on the cable connected to it.

PRODUCT DATASHEET PDF

  

Menu a tendina
 
Back to content | Back to main menu